Home>porduct center>micropowder mill

micropowder mill

micropowder mill introduction

micropowder mill is designed basing on our 20 years’ manufacturing experience, absorbing the Swedish advanced machine manufacturing techniques. Micro powder mill is a new type of mill for making super fine powder through more than 20 times of test and improvement. It is the latest type of product of micro-powder mill that leads the world tide.

micropowder mill is a new type of mill for making super fine powder through more than 20 times of test and improvement. The fineness can reach to 0.006mm; micropowder mill is mainly used for processing gypsum, calcspar, talc, and other materials used in painting, pigment and cosmetics industry. Compared with jet mill, It is economic-cost, high-capacity, and the spare parts just need to exchange once a year; The bag filter is added to protect the environment.

micropowder mill Application

micropowder mill(also named micronizing mill) can grind calcite, limestone, calcite, dolomite, kaolin, bentonite, talc, illite, pyrophillite, barite, meerschaum, fluorite, potash ore and other more than 200 kinds of materials that Moh's hardness is below 6, non-explosive, non-flammable minerals.

working principle of micropowder mill

The main bearing and each dial are driven by electromotor of main equipment through reducer, and numbers of rings and rolls which are rolling in the ring channels are driven by dial through plunger. After being crushed by hammer crusher, the big materials become small ones and they are sent to the storage bin by elevator. The electromagnetic vibrating feeder sends them to the middle of first dial evenly; the materials will be driven to the edge of dial by centrifugal force, and fall into the ring channels and are pressed, crushed and ground by the grinding rings and rolls. Then the materials fall into the second and third ring and crushed and ground. The high pressure centrifugal blower inhales air from the outside and blow the materials which are ground in the third ring to powder Separator. The rotating turbo in the powder Separator makes the coarse materials return to the mill and reground, while the fineness mixes with the air and be drawn to the cyclone and be discharged from the discharging valve which is in the bottom of it. The air which mixed with very little fineness are purified by impulse dust catcher and discharged by blower and muffler.

micropowder mill main advanced geatures:

Energy-saving
★ Wide Application Range
★ Good craftmanship
★ Powder Fineness: <6.5um~<12.5 um
★ Three-dimensional structure
★ Centralized control for the electric system, convenient to operate

micropowder mill main technical fata:

Notice: Any change of Three-Rings & Medium-Speed MicroPowder Mill technical data shall not be advised additionally.